Lexmark X2350 All-In-One InkJet Printer "load try 1 plain a4" Questions

...try to photocopy an a4 page it only prints the top left hand 1/4. Hi, Follow steps below Load photo paper or plain paper with the print side facing you. Open the All-In-One Center. Click the Saved ...

try the paper size in print preferences, and also look at the settings in the printer. Regards EngineerGR Hello CAJ1, Error Load MPF / A4 Plain 1/ 024-969 means there are no more A4 paper in the tray.

...Load unused plain white paper into the input tray, and then try the alignment again. 2. In the HP Solution Center, click Settings. 3. In the Print Settings area, click Printer Toolbox. NOTE: You can ...

...Load letter, A4, or legal unused plain white paper into the input tray. 2. In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox. NOTE: You can also open ...

...Load unused plain white paper into the input tray, and then try the alignment again.If the alignment fails again, you might have a defective sensor or ink cartridge. 6. Press OK to continue. 7. ...

...Load unused plain white paper into the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. Contact HP Support. Go to ...

...1/32 inch space on each side of the paper in the paper tray. Move the paper type selector back and forth 5 times, to make sure it is not stuck. Feed the tray with a minimum of 20 sheets of paper and ...

...Load Tray 1 Plain A4'. Is there a sensor somewhere? Please explain to me where it is. Thanks There's an input sensor but most likely that's not the problem. Usually, a specific error pops up if the ...

...1. Double check your document settings and double check the paper size loaded in the paper tray 2 and make sure they match. Also try printing a different document to see if the error persists. If it ...

...load in the machine, you will need to change the setting for Paper Size at the same time so your machine can fit an incoming fax on the page. 1 Press Menu/Set, 1, 3. 2 Press ▲ or ▼ to ...