NorStar M7324 Telephone "phone showing line 1" Questions

...phone system? Four lines are showing in use when no one is on the phone. We want those lines back. Thanks! 1. You can name the lines, for example (Line 1, Line 2) - or - (5551234, 5551235). You can ...

...showing wrong phone lines We use 6 phone lines, but have an additional 7th and 8th line we could use but are not set up with the phone company. Now one of our phones is showing line 1 as line 4, line ...

...phone.manualsonline.com/manuals/mfg/southwestern_bell/fm2552_1line.html Southwestern Bell Telephone All Models 2-9193 26955 DKS930 1-Line FC2548 1-Line FF908 900 MHz 1-Line FM144 FM2552 1-Line ...

phone is not showing the correct line voltage on line 1. The phone believes line 1 is dead. Use a regular phone and check line one for dial tone. If as the other reviewer is correct, and you are using

phone has line line 1 showing up on line 2 then you may have wires crossed somewhere. Or if you pick up a line on phone one and line 2 goes red on one of the other phones you have wires crossed. Last,

...showing incoming call information on line 1. I used to be able to see who was calling on line 1. Suddenly, it no longer shows and there is nothing on the call log. It worked then stopped. All other ...

...LINE 1 : followed by NONE or DAY or NITE or BOTH. If it says NONE, your phone never rings for an incoming call. If DAY or NIGHT your phone rings depending on the time of day and the time definitions ...

...phone line is ringing it is not showing the usual black triangle next to Line 1, 2, 3 etc. Once answering a call and placing on hold then again it's not showing a line in use. The beep beep happens ...

...phone system showing one of four states 1- Unassigned, 2- Ring Only, 3- Appear&Ring, 4- Appear only. Change the selection on the line by using the CHNG soft button. This is where line assignments ...

... type number and the name will show up Press line 6, line access will appear Press line 7 twice and change will appear Enter the name then press line 1 End session and save worked for me, hope it ...