NorStar Startalk Flash 2 Phone "program tech" Questions

...tech/vendor in to re-program. Do F903 -If F903 states Fetaure Codes then say OK to all. The system has defaulted and you have lost ALL programming, call tech/vendor in to re-program. Try F903 and say ...

...program the phones so that whenever we get a tech support call, it rings on everyone's desk until someone answers the call? Also, is there a way that I can program the phones so callers don't have to ...

...my display name and directory name. The administrator or tech needs to do this from Administration programming (FXXXDMIN), see your office admin or call the tech in for admin training. Password ...

...the page button from the home base for 5 seconds... then hit program/ mute again. It did not work for me, but the tech support said to charge phones for the night and try the process again

program exisiting extension number into new meridian phone In configuration programing (tech programming) "Change DN" needs to be modified. If you do not know the config password or how to program ...

...without pushing Line 1 To answer a ringing line by just lifting the handset that phone has to be programmed to ring on that line. This is done in the programming mode under

...phone only rings for one of the lines. How do I get it to ring for both lines? This is tech side programming known as Configuration, clients usually call in a tech/vendor for this. You need to

desk This requires configuration programming with knowledge of how to navigate and program on the configuration side and not the administration side. Best to call a tech/vendor in for line programming

...on to the phone How can i program someone's extension on to my phone Yes depending on the PBX model you need to get into program mode and assign key data for that extension. tech support at ...

i have to push the line ringing to answer Because your phone is not programmed to ring. You need to call your tech/vendor in to program it for you (tech side of programming) known as Configuration.