Maytag MTB2156GES Top Freezer Refrigerator "fan not working" Questions

...fan stops working after a couple of days. I notice some frost on the back wall after the fan stops working. The compressor still works when the fan quits and the temperature controls and lights work. ...

fan which is working. This problem could be caused by the motherboard having defective relays, bad fan motor=> DA31-00103A Fan Motor  Sounds like someone will need to examine the fan motor and

fan not working Check first input power supply of fan if its OK then problems can possible in the fan motor . you can check pre fuse by a tester with continuity method Did you find the solution to the

...which draws cold air from freezer. If so is fan working, if fan not working may be faulty fan or thermostat. May also be blocked duct from freezer to refrigerator, only there if fan is used as

...fan not working? which one inside of ref, or one near to compressor, check fan, remove 2 wires from fan terminal, use ohm tester, place tester lead one on each fan terminal, if you get a beep sound ...

...fan has stopped working or the defrost is not working and the ice build up stops the fan. First unplug the refrigerator for 12 hours or so to see if there is ice build up that is stopping the fan. If ...

...fan not working My evaporator fan was not working. I replaced the fan and the new one is not working either. The compressor runs, the condenser fan runs. Any idea what it could be? from bosch parts ...

...fan is not working? 2- the part in my frig says 240334002 can I use FAN MOTOR KIT WX4X988, (R75) or can I use any fan that looks and mounts into place the same The freezer not getting cold enough is ...

t run. Hence confirm the fan is working or not working by pressing the door switch. If not working , you have to replace fan. And also confirm that fan throw portion is not blocked by any storage item

fan not working on fridge freezer fan in fridge not working That's the evaporator fan! If its not running, it can be due to several reasons. First check for voltage at the fan motor. Then make sure ...