Samsung HL-R6167W 61" HDTV "popping noise shuts" Questions

noise came and the screen will not come on, and the tv shuts off and then tries to turn back on. i took off the back and pulled out the the fan. Then put in a fat screw between a slight gap whick kept

...noise & a pinkish color flicker. I immediately turned it off by remote, now when I plug it in the lamp light flashes and the humming starts & stops like it's trying to reset itself this ...

...noise coming from the back of my tv. Then the tv shuts down. The three light go on. Two on the top green. One on the bottom. binking red.Turn on the next day and the tv works fine. The picture and ...

loudly then go out.What could cause this ? Hi, My samsung dlp 46 tv was making a loud crackling and popping sound from the speakers, I turned OFF all the volume control on my tv from the menu the srs,

...popping noise and shut off, then made whirring noise. Tv made a loud popping noise (as if a light bulb blew, also had the smell like something fried) and shut off. All three lights in the front were ...

...popping noise then screen goes black but sound still on sometimes pops then shuts off and turns back on it is still under extended warrenty Sounds like flyback shorting out and shutting down high ...

...made apopping noise rca P52921 52 in. projection made a popping noise and shut off, then made a clicking noise until i unplugged it sounds like possibly the high voltage amplifier' just a ...

...popping noise Turn the set on, light comes on it pops (almost sounds like a sizzling pop), light goes off and comes back on, does the same thing. It will do this three times then it just shuts off. ...

...noise. It sounds like somehting is trying to spin but is out of balance. the tv then shuts off. check the lamp to see if the pop was the filament breaking. the whirring could be the ballast trying to ...

...popping noise, as the volume was already on, but the TV tries to power up and makes soft hissing/ticking noise 3 times before shutting itself off. There is no blinking lights and screen stays black ...