Samsung HL-R6167W 61" HDTV "lamp thermal sensor" Questions

I replaced the color wheel, ballest, and lamp. On the front the lamp and stanby/temp lights are both flashing Have you tried replacing the fans. It might be a thermal sensor tripping. Hope this helps

lamp is aging or the vents are blocked causing the thermal sensor to over heat. It looks like is the tv lamp.. lets try to clean your tv grave a compressed can air and remove all the dust that your tv

...been replaced twice for the same problem, but appears not to be the solution. Any other suggestions? change the thermal sensor located on the light engine section on top of the lamp pn # ...

lamp are working properly. It seems more like a video source failure or one of the thermal sensors that is mounted on top of the color wheel assembly. Will keep you posted about my findings with my TV

...thermal sensor is located on the lamp cartridge housing. here take a look at this link ...

Lamp Thermal sensor? Thanks for your help on my last problem. I had a 34 code and replaced the capacitors on the power board and I now have an image. Now I am getting the message "TV will shut down in

...Lamp Thermal Sensor with the new version, part # 299P313010A. The sensor is located on the Lamp Cartridge Housing. See Service Tip VS-72B. Under rare circumstances, when a replacement thermal sensor ...

...the lamp assembly housing. hey ron did this work? replacing the thermal sensor? mine is doing the same thing. I had to have my ballast replaced as well as the lamp again. how much did it cost to

...lamp driver are not corroded or bit burned.If it is so then replace it. The thermal sensor may easily be at fault especially if the indicator error flashes 4 times. this part is not expensive,you may ...

...lamp sensor... Or thermal fuse located above the bulb's housing. This tv is known to not turn on for these two reasons. The thermal fuse looks like this: The door lamp sensor is located where the ...