HLM507W #1 Fan Problem Have HLM507W with #1 fan error on screen. Found that #1 fan (lamp fan) was not turning. Found a similar fan with similar specs on internet. Replaced fan. Now fan is working but
Question about Samsung HL Televison & Video
...was the lamp fan. Just read a post on this sight & the tec called the lamp fan #2 !! How many fans does this ****** have ?? Can anyone tell me were fan #1 is located ??? Thanks Harley hello ...
Samsung DLP Check Fan #3 We are getting an error message "Check Fan No. 3"... What does this mean, and how do you fix it? where is fan #3 in samsung dlp The THIRD FAN is behind the Digital board where
...opened up the little service window on the side and peeked inside the tv set but could not see any fans. I'm guessing i have to take the rear panel off too. You have 2 fans one fans the Lamp other ...
...the set off and hold the Interlock Switch on the right side up,Turn "ON" the set and look for three fans,one of them will not be turning. There are two small fans and one large one. The Large Fan is ...
...seconds please could you help. If a ?Check Fan? message appears on the screen: Take a look at the fans while the unit is on. If a fan is not operating, check the connector to that fan. If the ...
...cover on locate the fan look at it carfully to see first of all it is seated in its housing or the fans housing is screwed or clipped in its holder properly if everthing is as it should be remove
Question about Samsung HL Televison & Video
...sceen fan 2 error can any one help? If a ?Fan error message appears on the screen: 1. Look at the fans to see if they are running while the unit is on. If not running check the connector. If the ...
Question about Samsung HL Televison & Video
...or the exhaust fan right next to it. But as a tech I would recommend that you carefully check all fans by taking the back cover off and finding the trip switch (it needs to be held down, usually ...
...the TV shuts down. would like to fix myself if possible. I do not have a service manual One of the fans most likely has failed, or there are some parts overheating on one of the boards in the area
163 questions posted
Usually answered in minutes!
445 Questions
373 Questions
297 Questions
280 Questions
244 Questions
