Samsung HL-R6167W 61" HDTV "driver 20" Questions

...10-20 seconds any quick fix? Replace the lamp. If the condenser is illuminating on the lamp driver, the power is making it to the lamp. If the lamp is not lighting... it's the lamp. I hope this

20 seconds and does all over again. What is wrong? Our tv is about 2 1/2 yrs old and did the same thing we had to replace the bulb and bulb driver board this fixed the problem hey tinysue can you tell

...20 seconds then shuts off. Good Day; Sounds like you have a bad green picture tube that has failed. To check this out; remove front speaker grill, remove small panel, you will see three CRT's (pictue ...

...driver that is on the back of the screen needs replacing. you can find new ones or second hand one on line samsung tv do this a lot. east to replace and the boards can cost as cheap as £20 or as high ...

...9800pro AGP with VGA/HDMI/S-video outputs, the input worked for about 20 minutes till I updated the drivers and rebooted. Ive tryed reloading the origonal drivers and still no video. Is there an ...

20 times and then the TV will turn itself back on again. I have checked the timers and they are all off. This occurs several times per hour. I am trying to determine what the problem could possibly be

...20 b Look like RG convergence is out , but it's hard to tell from the pic if you can't correct it with the set up in " convergence " on the setup menu , then your Convergence chips are failing if you ...

...20 driver bit to remove the bezel around the screen. Carefully... The screen can be easly scratched He fell right in front of the tv screen panel,have alots of forced hit it to the screen panel.Sorry ...

...20 minutes into viewing, the picture "loses" it's red color/hue, and the image is then only in greens and blues. The image itself is clear, so it's just a color problem. If you turn the TV off for 30 ...

...20 to 30,OOO volts. use a voltage probe, or make one with a short wire and 2 allagator clips and a flathead screw driver insulated handle, carefuly clip one end to the ground or shield ******** ...