Toshiba 46HM95 46" HDTV "replace front side indicator lamp" Questions

...replace the lamp, you need a Phillips screwdriver. Turn the television off and unplug the AC cord. Remove the front speaker grill by gently pulling on each side. The grill will snap out. Using a ...

replace the lamp: 1. Turn off the power on the main unit. Wait several minutes, then unplug the power cord. (The cooling fan will continue to operate for about two minutes after turning the power off.

...front panel. Select Connections, then Special Features, then Remote Setup. Choose TV (default). Power indicator is blinking or fl ashing If the light blinks 5 times, pauses, and blinks again 5 times, ...

...Replace the thumb screw and hand-tighten 10. Plug in the power cord and turn on the TV. After the initial warmup period (which may take up to several seconds for full picture brightness), the TV ...

...may try it after you check the lamp driver connections and if you decide to replace it,it is found on the right side near the front by looking by the back with the back cover open. Good

...front panel of the TV. On start up, a high pitched whine is heard. there is no picture and no sound. This indicates a bad lamp. Get a replacement (make sure to check your TV for the code and type - ...

...front. Got new lamp (Sony KDF42WE655 w/ cage assembly) and cant figure out where to put it in at. I don't want o disconnect a bunch of unneccessaries. And unfortuantely I lost my owners manual. Help ...

side to see if it's not burn't out good luck regards shaun First power on to tv.Check all the three indication front LED lights.The power,Fan temp,projection Lamp LEDs.If the Fan temp or the Lamp LEDs

...front panel has been changing from yellow to red for about the last 6-8 months. It has recently started to fade color (green hue-almost like watching black and white). What's wrong with it and is it ...

replace the lamp, you need to unplug the television for about an hour or 2, so the high voltage in it will dissipate, then you get the appropriate screwdriver to unscrew the screws that are around the