Maytag CWG3100A Gas Single Oven "getting hot" Questions

is the top heating element inside the oven supposed to get hot even if not set on broil? Yes the top element does get hot even on bake but it does not get red hot just hot. It will get hot enough to ...

Exterior surface of oven gets hot when turned off The exterior surface of our MCS130S wall oven gets very hot when we turn the oven off. There is a fan that runs for a brief period when we turn the ...

...getting hot? My last oven didn't get hot at all. Normally oven gets hot but just lukewarm externally(front and sides). Compare it when it was still new. If it is hotter than it was, then the ...

...getting hot although fan is working. When turned to conventional, main oven only gets slightly hot. However, when main oven is turned to grill, it gets very hot - hotpoint BD52 IT SOUNDS LIKE THE ...

Is the stove supposed to be extremely hot on the outside while self-cleaning? My oven gets extremely hot on the outside when self cleaning. Is it supposed to get that hot on the outside? I DON'T think

VDGO viking gas oven upper won't heat I have a VGDO270 viking gas oven. The upper oven does not get hot. The igniter gets cherry red, but no gas is turned on to get the oven hot. How do I determine ...

...hot. When on bake, it get's to 200-245 deg. OHM test showed bake element ok (19) thermostat is bad If bake element is not getting red hot, either the element is bad or the relay on the control is

the bake element in my oven wont get hot. the broil element does but the bake element wont. it got hot and then cooled off. already installed new element and it turned orange, got hot and then when i ...

...getting hot it draws a certain amount of amperage which will allow the gas valve to open resulting in a flame. The igniter is indeed coming on yet its not getting hot enough to draw the proper amp ...

...getting hot My Frigidaire Imperial double oven is not getting very hot, bottoms is hotter than top, and bottom takes a while to get hot, top barely gets warm. I would recommend checking the circuit ...