...red this means that there are two separate errors. A flashing lamp light means the lamp failed to ignite. It could be a lamp driver problem or lamp failure. Replace the lamp to resolve the issue. If ...
...red instead of orange as usual. After 3hrs I turned it back on, cleaned the dust off the fan and the Temp. light did not come back on. There are three temp sensor inside the projector and now your ...
turn on my EMP 720 the green warm up light flashes as normal, but then the red, 1 second flash warning light comes on, I have checked and cleaned the dust filters and also checked the bulb which seems
...turn it on the red lights come back on again almost immediately. I have replaced the bulb with a brand new one but the projector still does not work. Is the cooling fan working? (If not, then that's ...
Question about Hitachi Office Equipment & Supplies
...light turns red, and the power light flashes red. Nothing is projected. I have checked the air passage, cover attachment and replaced the bulb as sugggested on page 63 of the manual: ...
red when i go to turn it on. and then nothin happends... whats the dilio!? thats not a bad thing, just clean air filter. if you have done it, then go to air filter on the menu, then keep reset pressed
Question about Office Equipment & Supplies
turn it on the red light food and a few seconds later the red light blinks TEMP. I cleaned the filter and turn off the projector and turn it on again and the same. Tried everything else fails. What to
Question about Mitsubishi Office Equipment & Supplies
...turn on, only the power light shows red, the status light is blank. Tried the remote and manually turning it on. My projector won't turn on, only the power light shows red, the status light is ...
Question about Office Equipment & Supplies
...red after unpluged when u turn it on the green flashes you see light andthe the red light comes on blinks 5 times then once yellow wht can i do i just replaced the bulb Make sure to clean out the ...
red power light when i turn on my projector the light goes green it powers up for about 20 seconds then the power light changes to a red flashing one for about 10 seconds then back to solid red and it
43 questions posted
Usually answered in minutes!
54 Questions
43 Questions
26 Questions
22 Questions
18 Questions
