Hitachi CP-X250 Multimedia Projector "red lamp error light" Questions

Ad

Question about Hitachi Office Equipment & Supplies

2 Answers

Lamp error and Temperature error lights are flashing red this means that there are two separate errors. A flashing lamp light means the lamp failed to ignite. It could be a lamp driver problem or lamp

Ad

Question about NEC Office Equipment & Supplies

3 Answers

...Red):  Lamp has reached the end of its life.  Lamp replacement messege will be displayed.  Replace Lamp with same type and number.  After replacement reset lamp hour. OK. If it ...

Ad

Question about NEC Office Equipment & Supplies

1 Answer

...red status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, this could indicate a defective ...

Question about Sanyo Office Equipment & Supplies

1 Answer

Red 6 times blink (Lamp Error). I've put back in the old bulbs...same thing. 1 red blink every 2.5 seconds indicates a cover error-- for this check the lamp cover 2 times red blinks very 2 seconds

Question about NEC Office Equipment & Supplies

1 Answer

red light 6 times is a lamp error. either the lamp is old and wont start up or the ballast power pcb is not working. can you hear the sparking of the high voltage trying to strike the lamp. if you can

Question about NEC Office Equipment & Supplies

2 Answers

...the ballast most likely needs to be replaced Six blinking red lights usually means a "lamp error". You should wait one minute and try again. It does not mean that the lamp has to be

Question about Epson Office Equipment & Supplies

1 Answer

...replaced the lamp on my powerlite s3 yesterday. it ran for a few hours just fine. when i turned it back on today both the temp and lamp light are red. what could be wrong? same happen to me as ...

Question about NEC Office Equipment & Supplies

3 Answers

...red every .5 second at .5 second intervals for 6 cycles. The power light is solid orange. Per NEC manual, it says to wait a minute and restart. It just continues the same error condition. I replaced ...

Question about NEC Office Equipment & Supplies

1 Answer

...red - then there are 4 flash combinations. 1 cycle (0.5sec On, 2.5sec Off) lamp cover or housing error 2 cycle (0.5sec On, 0.5sec Off) temperature error 4 cycle (0.5sec On, 0.5sec Off) fan(s) error 6 ...

Question about NEC Office Equipment & Supplies

3 Answers

red: 1 time- lamp cover or housing error. check lamp door. 2 times- temperature error. 4 times- fan error. one or more fans bad. 6 times- lamp fails to light. if lamp is new, ballast is bad. the power

Not finding what you are looking for?
Hitachi CP-X250 Multimedia Projector Logo

43 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Office Equipment & Supplies Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hitachi Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...