Hitachi CP-X250 Multimedia Projector "mean temp light comes" Questions

...temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any suggestions? Hi, if the Lamp error and Temperature error lights are flashing red this means ...

...mean on my hc1600? won't power up the status light on my hc1600 and power light comes on but nothing after that it won't power up...nothing at all. what is the problem? This could be due to a blown ...

...TEMP light flashes. What does this mean and can I take it to an Electronics shop Like MAPLINS to be repaired or can I do some thing on my own. The projector has been stored in a room which has a ...

temp and lamp lights come on and stay on with in a minute of powering up. All the fans seem to be working. The lamp only has 334 hours of use on it. What could be the problem OK, that explains it. The

...temp/fan light blinks My sony VLP-SC50 projector has been in storage for almost 2 years. I wanted to use it for Superbowl today but seem to have a problem. The unit comes on and works just fine for ...

...mean. Check to make sure that the panels are seated properly. When you replaced the lamp, the outer cover was removed. If that is not seated back 100%, the unit will not work. There are a number of ...

...temp. However if the squeaking noise is coming from the color wheel that would mean it's bearings have failed and if is is unable to phase lock at reference speed the lamp would also not strike. The ...

...temp room. Since your status light is Orange and red flashing. This means that the projection lamp needs replacing. If its steady red then the projection lamp has burned out. Replace the lamp There ...