...blue lines in the picture, mostly in 1080i, and when the picture we are watching is dark, like a night scene. This has just started. We've had the TV since 2005. Any thoughts? Here's something that ...
Question about Sony Televison & Video
...intermittent G1 short in a blue CRT(picture tube). To determine the tube failure, you must take front panel off, rectangular cover under it and gain access to CRTs. You will see 3 picture tubes with ...
Question about Sony Televison & Video
...Intermittent then Turns Off Make: Sony Model: kp-57hw40 Info on Back: May 2002, Serial # 90.... Not sure if these are all related but about 1 year ago, noticed arching blue lines in the background. ...
...blue power light was on, but the temp and lamp lights both were flashing red. Now the lamp light stays on and the television will not turn back on. I went to Hitachi's website, but that was no help ...
...blue light on a second or two and is off again. Trying after 5 or 10 minutes it will turn on. This afternoon it turned off and the lamp light kept blinking. Manual says to replace the lamp. That is ...
intermittent chirping. Any way to verify the problem and estimate repair costs? Your convergence chips have failed. Sometimes when they fail the TV will look 3D or distorted and sometimes it will just
intermittent and goes from normal to green not working frequently. Lots of light green flashing. Had the convergence board replaced last year. When green is out, perfect focus does not work and unable
...Intermittent shut off Cause: Check auto link and 4 event timer. redress cabling from front control panel away from blue crt-yoke-hv lead Symptom: NO PIC OR OSD, PWR LITE COMES ON Cause: CHECK C603 ...
Question about Hitachi Televison & Video
...blue and switch on. Howe can I fix it, if at all I have had it a little over a year with no problems Try unplugging power cord for a couple of hours then reboot. If that does not help you may need a ...
blue gun (I think) became totally out of convergence with the other guns, so there is a "shadow image". Accessing the convergence controls through the menu did no good. It's too far out for that. Also
451 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
325 Questions