...works perfectly and then the screen goes blank again. It seems like an odd problem. Is it the control panel? Is is a shielding problem? Is it something else? Can I replace the control panel myself? I ...
Question about Microwave Ovens
...has stopped working. When pressing any buttons the clock display goes blank and nothing happens. I can press the clock button and reset the clock but any button blanks it again Bad control
...goes blank and needs to be reset. I reset the clock and it works fine for a few days but then it happens again. No other clocks in the house loose their time so the problem is not due to power ...
Question about Whirlpool Microwave Ovens
...works and other times it goes out again. Sounds like the control panel. All the other parts are just brute force parts and either work or they don't. Over heating components on the control board are ...
...works. When try to cook something, microwave runs for about half a second and then oven stops and the display goes back to blank. Probably fuze is blown again. What part could be bad to cause the ...
...even goes blank, after approx. 15 - 20 min. it will reset it self and work again but only for about 4 or 5 min. I've got the exact same problem with this unit. Don't have any solutions,
Question about Microwave Ovens
...went blank and no electricity. I replaced the fuse and clock light c Replaced the fuse, that brings electricity, but as soon as I start the microwave, the fuse goes dead. time for a new
Question about GE Microwave Ovens
...goes blank. The Express will work but... I have done a "hard reset" by shutting off the power. This seems to work but then it fails again a few days later. This last time the oven was on whenever we ...
Question about Panasonic Microwave Ovens
...goes blank after about 10 seconds. Is this some replaceable part, or is it totalled? It sounds like a bad door switch to me. You need an ohm meter and know how to use it. Checking door switches on ...
goes completely blank, after about 5 -10 mins the lights come back on, you have to reset the clock but it will work again so long as you only make it work for 1 min at a time, can it be fixed? is it a
50 questions posted
Usually answered in minutes!
226 Questions
177 Questions
118 Questions
86 Questions
90 Questions