Baby Lock Eclipse Serger "stitch tension" Questions

the bottom stitching looks like a line and not stitches the top stitching is fine I have cut a piece of material on the bias and stitched on it. When I pull the material on both sides, the top ...

...stitch is it bobbin tension or something else wrong Empisal pacesetter, Not sure what you mean by "tacking" stitch. Are the stitches exceedingly long like a basting stitch? That would need a stitch ...

...tension for straight stitch sewing. B. Thread tension too loose for straight stitch sewing. Turn dial to higher number. C. Thread tension too tight for straight stitch sewing. Turn dial to lower ...

Loose bottom stitches on Singer 1507 The top stitches seem ok, the bottom stitches at very loose. Adjusted the bobbin tension to high, no help. top tension must be adjusted to fix loose stitches of ...

...tension on bottom stitch? how do i adjust tension on bottom stitch? There are tow places where the thread tension is adjusted. One is bobbin. This is not routinely adjusted. Just once and it is good ...

...a heavy wool would need a looser tension. Best way to get the tension right is to take a few stitches, then look at the bottom side of the fabric. If the threads are loose, then tighten the ...

stitch and readjust if necessary. If the top thread shows on the underside of the fabric, the upper tension needs to be tightened. The object is to have an equal tug of war between the two threads. It

...tension stitch? Stitch length on 2.5 and stitch width on zero, and just loosen the top tension by a half number if you want the tension looser.  If your machine has a stitch selector knob, make ...

...stitch tension is correct, each stitch is at a slight angle instead of in a straight line. I have tried adjusting both thread and bobbin tension, but I cannot get proper stitch tension and a straight ...

...tension on top but stitch in still the same. Peggy pucker is caused by too loose or, to tight adjustment of: the thread tensioners both the bobbin tensioner and, the needle tensioner need to be ...