...top to wind thread around. The fly wheel spins though...I've been putting thread on the bobbins by hand. If the fly wheel is going around then the clutch isn't disengaged to wind the bobbin, ...
top thread. Rethread the top thread and insert your bobbin.The manual for the 4228 is available here: http://www.singerco.com/uploads/download/492_4228_4220_030707_new.pdf . See page 31 (18 of the pdf
...thread into both the top and bottom hole of bobbin to wind? I can wind the bobbin but the thread is loose and bunches up. just wind the thread around the bobbin, don't put it through any holes, wind ...
...top to run thread through to hold tension. Wind thread a few times around bobbin and put bobbin on the peg on top of machine. Push lever toward bobbin peg or peg toward lever (whichever moves) and ...
Question about Husqvarna Sewing Machines
...put a spool cap on first for the thread reel to rest on. No need for the other one on top. Do you have your manual? There are excellent instructions and illustrations on pages 10-11 of the D1
...thread across the top of the sewing arm to the tension unit just next to the gap in the case through which the thread is normally threaded - the tension unit looks like the top of a shiny screw ...
Question about Husqvarna Sewing Machines
...top thread threaded through the needle. Place the bobbin on the spool spindle with the mark (a stylized H) outwards. Bring the bobbin spindle down. Next pull the thread from the needle under the ...
...top thread is on the spool pin with the appropriate spool holder. Bring the thread under the first thread guide (going from right to left, as you face the front of the sewing machine). Bring the ...
...top on the right side of the sewing machine. 3. Swing up the bobbin thread spool pin. Move the bobbin thread spool pin up as far as possible. 1-Bobbin thread spool pin 4. Place the bobbin on the ...
166 questions posted
Usually answered in minutes!
105 Questions
58 Questions
66 Questions
64 Questions
46 Questions