Euro-Pro Shark 60 - 384 "spool pin" Questions

...spool pin for a Baby Lock Espree. Replacement looks simple if I can find the right part I found two spool pins for the Babylock Espree EM1 listed here: ...

...spool pin Some spool pins pull out, others have skrew threads on the bottom, yet others need to have the spool casing removed. Depends on your sewing machine. Search the internet for: Make + Model + ...

...spool pin on babylock model esp Depends. Some spool pins simply push in and snap in place, but as many machine brands existing, there are probably double the different spool pins available... ...

...spool pin has been pusged too far down and i can't get it out. Does anyone know how to pull it out? Please If it has not been pushed all the way down so part of it is still projecting above the ...

...spool pin on my Brother VX1010 doesn't come up so I can't put a spool of thread on it. Difficult to say. Some machines have a spool pin that can be pushed down for storage or transport. Your machine ...

...spool pin is inserted On the Janome My Style 20 there are two thread spool pins. These are inserted into two plastic housings. The spool pins can normally be pushed down and pulled up. Two wire clips ...

...spool pin, be sure the spool is inserted onto the spool pin in the proper orientation. Per the manual; Set the thread spool on the spool pin so that the thread unwinds from the front of the spool. ...

spool pin Hi Phyllis I believe this youtube video will help you, Take care...CHEERS.. https://www.youtube.com/watch?v=abGDVhDlZLs You'll most likely need to open the top of your machine, although some

...spool pin I was sewing and everything was fine, but then all of a sudden the spool started bouncing and the thread was spinning around the spool pin. I then got a "birdsnest" of bobbin thread on the ...

...spool pin?? Where does it go ? bAttach the extra spool pin. Put the extra spool pin in the hole on the top of the machine. Put the second spool of thread onto the extra spool pin. See page 25 in ...