Euro-Pro Shark 60 - 384 "lower presser foot" Questions

lower the presser foot, the lever goes down but feels loos and doesn't actually lower the foot. It will raise the foot to the upper most level but one't lower it. The lever itself moves freely but the

...Lower the presser foot holder (using the presser foot height lever) until it locks onto the foot. For the zipper foot, you need to fit the rear pin on the foot into groove at the back of the presser ...

lower the presser foot holder until the cut out is directly above the pin on the foot,,as you lower the presser foot holder the presser foot will automatically engage when put down on the pin area the

...needle bar raises and lowers, the foot will hop up and down slightly. Make sure that you always lower the presser bar when using this foot. Lower the feed dogs also if your machine has this

...lower the presser foot and touch the foot control, but unfortunately, the machine gives a message that the presser foot is not lowered, although it is. I cannot do a thing now. How can I rectify it? ...

lower or raise the presser foot. I had to remove the whole presser foot attachment and foot to get the last embroidery out of my machine. I've tried cutting the machine off and restarting No luck Does

...presser foot icon flashes and will not sew Be sure the presser foot is installed correctly and that the presser foot is lowered before beginning to sew. If that doesn't help, try a different presser ...

Lower Presser Foot message when presser foot is down My PE770 embroidery machine keeps saying lower presser foot when the presser foot is already lowered. It is not recognizing when it is in the down ...

...lower the presser bar. Press down on the presser foot thumb screw on the presser foot shank as you lock in the presser foot. For one-piece presser feet, loosen the thumb screw and let the foot down. ...

...presser foot icon in the user's guide That light means you need to lower the presser foot. It cannot sew until the foot is lowered. The lever to lower the foot is behind the needle area on the