MC4400 skips on the zig zag stitch when sewing Janome MC4400 skips on the zig zag stitch when sewing stretch fabrics You must buse an anti static needle otherwise yoiu will miss stitches.
...zig zag stitches. I can do the two smaller but if I set it to the wide ones it sews the pattern but randomly skips stitches. Can anyone help???!!! Thanks a ton! Jenn your machine might have a problem ...
Skipping stitches while zig-zagging I am trying to do a zig-zag stitch around a letter to make an applique and my sewing machine keeps skipping stitches. I've already changed my needle and that didn't
zig zag stitch is skipping sporatically zig zag stitch is skipping all over the place. I have adjusted the tension from one end of the spectrum to the other and still the problem exists. I have also ...
...zig zag problem. i believe your machine is skipping the stitch on the RIGHT side as you sew and this is normally a timing problem. Lower your needle about 1/16 inch and try it . It might work to ...
...zig zag and skips stitches sometimes. It zig zags but only gets half the stitch. If your using a stretch fabric, youll need to sew in a stiffner tape. if the fabric "flags" i.e moves up and down with ...
Question about Singer Sewing Machines
...skipping stitches and creating loose stitches. Help Joseph A. Guthrie Joe, you might try a larger needle than you're using. You might also want to try a larger leather needle. You machine should take ...
skipping stitches with straight stitching and zig zag. I have tried adjusting the stitch length and width. Nothing works. Any suggestions? Thank you. Are you using a brand new ball-point needle? Basic
In most cases, the machine will stitch forward a couple stitches and then reverse once or twice. But a zig-zag works just as well. Plus the forward/reverse is time-consuming and uses a lot more thread
Question about Sewing Machines
...zig zags, then skip several stitches, giving me a straight line of stitches, then do a few more perfect zig zags, etc. I have changed thread, rethreaded, cleaned the bobbin area, and changed the ...
16 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions