Question about Sewing Machines
button + thickness 3.Pass upper thread through the hole of buttonhole foot and attach buttonhole foot to machine. Bring upper and bobbin threads to the left under foot. 4.Position fabric under presser
...button-hole foot? hello, How do I attach my fit button-hole foot to my presser foot on my Necchi Sewing Machine Model #3537? Just pull down on the original metal foot. It will snap off and then you ...
...foot with a button at the back of the pressure foot holder - press the button to release the foota clip on foot with a little lever at the back of the pressure foot holder - lift the lever to release ...
Question about Elna Sewing Machines
foot near the button holder.) Place a corner of the fabric under the foot and press the up/down needle button twice. Pull the thread to the back of the fabric. Then position the fabric at the starting
...foot holder. If so press the button and it will release the foot. If not you get to grasp the toe of the foot when it's in the "up position" and press down. The foot should then snap off the holder. ...
...button hole foot. (might have an R on the bottom) To snap off: Raise the needle and presser foot. Press the red button on the back of the foot holder and the foot will drop. To snap on: Place the ...
...it included within a "tin" of accessories at a local thrift shop. If neither of these options work for you check with your local fabric store or sewing machine repair shop for the correct button
button was pressed if the foot controller is not connected) and the reverse/reinforcement stitch button was pressed while the presser foot is raised. Lower the presser foot lever before continuing the
Question about Bernina Sewing Machines
...button the presser foot lowers but the red light does not come on. Hi, You will usually have to unplug the foot pedal if you want to use the start/stop button. Have you disconnected the foot pedal? ...
...button at the buttonhole foot holder(back end of the foot), the size will remain the same each time you sew a button hole. 2.For a 4 step buttonhole, the size is determine by sliding the foot against ...
16 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions