Janome Memory Craft 9500 Computerized Sewing Machine "using usb" Questions

my designer 1 usb will not recognize my usb stick why Certain brands do not work and if you use a USB of many Gigs, it won't work either. Try using a different brand USB or a smaller GIG.

When I try to open the futura program a pop up box continues to say check that USB cable is attached and machine is turned on. I tried two different USB Cables and turned the machine on. However the ...

I have a bernina 180e, laptop was stolen, I have bernina designer plus V3, can I use a usb to parallel adaptor to use software and to upgrade to V7? I am going to upgrade my computer to Windows 7 or 8

English instructions for simplicity pattern 1296 Contact Simplicity for help or purchase a duplicate of the pattern. ... Contact Simplicity for help or purchase a duplicate of the pattern. AmanStino ...

I have a 180 and tried to connect to my computer with a serial to USB converter, and downloaded Artlink on my computer. Keeps saying there is no connection to the serial port. Any ideas? yes you have ...

...using a USB hub, try a direct connection. Make sure that you are using the type B port on the sewing machine. If you still have problems and the computer USB ports work with other devices, then try ...

...drive is formatted with the 'FAT/FAT32' filesystem (using a PC). When it's 'NTFS', backup all the data and format the USB drive using the FAT32 filesystem instead before restoring your designs on

Can my designer 1 be updated to use a cd and a usb port. In one word: No. Sorry. It can be updated to a USB port, but the port will only accept Husqvarna formatted USB sticks, not an external CD drive

Can I get instruction sheet for simplicity pattern 6258 babies layette Can I get instruction sheet for simplicity pattern 6258 babies layette AmanStino QUICK CHARGER 3 0 USB charger Multi Port ...

I just purchased a used Babylock BLR3 Ellure Plus machine. When I try to use the USB function the PES files that I have on the USB are not showing up. Is the USB port faulty or am I doing something ...