Janome Memory Craft 9500 Computerized Sewing Machine "bobbin thread tension" Questions

bobbin thread tangling under fabric while stitching. Seems like it's not releasing from the bobbin. Check bottom thread (bobbin) tension. Pinch bottom thread (bobbin) between finger and thumb and make

bobbin thread stitches get pulled up to top of fabric. How do I adjust tension to fix this problem? Bobbin thread showing on top side means the top thread tension is too high or there is too little or

...bobbin thread tension issue. Be sure to thread per machine instructions. See following Singer video... testing top thread tension. https://www.youtube.com/watch?v=O7N4XaIV6ms Test tension of top ...

...bobbin thread color if possible. If it's bobbin thread then it's escaping the bobbin tension spring. If top thread then likely tension too low or uneven feed. This machine has a horizontal spool pin. ...

...bobbin thread lies flat or bunches. If you increase the needle thread tension there is no improvement - even at the highest needle thread tension the bobbin thread is a mess. Any suggestions - I have ...

...bobbin thread too tight, you can try tightening the upper thread tension. If it still isn't resolved, you may need to loosen the bobbin tension. Bobbin Tension How and Why Tension is Adjusted ...

bobbin thread shows to the front. Does the bobbin or thread tension need adjusted Generally, tension adjustments are made using the upper thread tension. Most likely the upper tension is set too tight

...bobbin thread unspooling from wrong direction the bobbin thread will eventually escape from the bobbin tension spring and will loop on top side of fabric. The bobbin thread must unwind CCW. Not sure ...

thread on bobbin case=======clean inside case 5.Lint or thread inside hook==========clean inside hook 6.Bobbin case nicked bent or burred===check/change case TROUBLE;MACHINE STARTED SKIPPING STITCHES;