Question about Sewing Machines
bobbin out of the case. I've tried to see where to tighten it down but can;t find any place that needs to be tighten down. Hi Kathy it sounds like maybe something is in/under your bobbin case.
...place? Your bobbin is too short. The correct bobbin must be even with the bobbin case. If it is the bobbin case that is moving around then you must adjust the inner rotary hook bracket assy. It must ...
the thread which pops the bobbin, check under the boobin case make sure it clear of dirt and thread, also the piece under the bobbin case may also have been push out of place make sur it is in correct
bobbin case pops out of placeand the needle jams against the solid black plastic part. It won't sew at all. After taking it apart and putting it back in place, the first rotation to take up the bobbin
...place the bobbin on the bobbin winder on top of your machine, you then push the lever closest to it into the bobbin until it clicks. most newer machines will automatically quit using the needle when ...
...bobbin holder was popped out of its usual place. I cleaned the general area and put the bobbin case with new bobbin back in. Now I cannot get the thread to catch so that I can begin to sew. This is a ...
Question about Singer Sewing Machines
...bobbin case keeps popping out of place so when the thread is going around it, it jams and gets cut out so I can't even get to sew an inch. I have already tried taking it out and cleaning our lints on ...
Question about Singer Sewing Machines
...should now pop open. Gently pull it towards you to fully open the compartment. To close the bobbin compartment, simply push the bobbin cover back into place until it clicks and locks into
Question about PfaFF Sewing Machines
...Place an empty bobbin on the bobbin spindle. 5. Push the bobbin lever to the right to wind. A pop-up appears on the screen to inform you that bobbin winding is on. Press the foot control or the ...
...Bobbin holder case popped out, and does not go back in. Everytime we get it back in place, and start the fly wheel, it pops back out again. it sound like the machine needs to be serviced by a sewing ...
265 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions