Singer 8280 Mechanical Sewing Machine "reverse lever" Questions

...moving the lever up to the desired mark.  Tighten the screw and move the lever down to sew - to reverse just move the lever up until it hits the stop to sew the same stitch length in

Reverse lever My machine will only sew in reverse. Have used reverse lever many times but never had it stay in reverse. There seems to be no resistance when pushing lever. lever must be locked in. if ...

...reverse lever at the same time. Some machines need to be at a certain point in the stitch cycle for the reverse lever to be used. 1) Check the stitch length. If it is too small then the reverse may ...

Reverse lever won't work After lifting top to oil, reverse lever now doesn't push down into reverse take off the top again and take a good look while pushing the reverse lever.  See ...

...reverse. The lever is spring loaded so it returns to forward sewing when the button is released. Either the spring has come off or there is a bind in the lever(oil it). In order to solve the problem, ...

Reverse Lever isn't working... The reverse sewing lever on my Singer Simple is not activating the feeders. It continues to go forward when I press the lever down. How can I fix this? Most likely the ...

...reverse lever Lever is stuck in reverse positioon and machine will not sew forward. If you pull the bottom off the machine (half a dozen screws) there is a cam on the main drive shaft. The cam is ...

...right is a lever .. Bottom has numbers .. Mid says "fine" .. Move that lever up to the top for reverse You can obtain a manual from the Singer website - ...

reverse stitch where is the button/lever that reverses the direction of the stitch? On the 8280, the lever for reversing the stitching appears to be on the front of the machine, above and slightly to ...

reverse lever didn´t work... tried moving stitch length and width slides,out of frustration... , now lever moves but machine only goes in reverse and not forward...what can be done the machine is