Singer 8280 Mechanical Sewing Machine "handwheel stuck" Questions

...stuck Handwheel keeps getting stuck and unable to turn toward me, unless a lot of force is being used, and machine is able to run when stepping on peddle. What could be causing the handwheel to be ...

...handwheel ... Stuck Stop Motion Knob & Handwheel The Singer Featherweight Shop https://singer-featherweight.com > blogs > schoolhouse What is the best way to remove a stuck hand wheel. I am able ...

...stuck. So I checked the belt between the handwheel and the motor. I tugged on it (while the machine is off) and tugged on the belt to turn the handwheel. It took a couple tuggs to make the handwheel ...

...just need to take two screw drivers, one on each side, and gently pry the handwheel off. Nothing else is keeping it attached. Many of these are just stuck a bit and need gentle prying. Good luck. ...

...handwheel is stuck after I removed a piece of fabric that was stuck by the knife. if the handwheel won't turn, i'd double check nothing is still stuck. also, make sure you didn't half disengage the ...

handwheel is now stuck, after I wound the bobbin thread. Why is it not moving, after I changed the handwheel to engage with the needle? Take it back. New Singers are known for having problems. Upgrade

Handwheel is stuck I got a Kenmore Mini Ultra for Christmas last year, this is the first time I'm using it. It started sewing fine then it froze, the handwheel won't turn, I took out the bobber and ...

Handwheel Stuck The handwheel on my Necchi 4825 sewing machine will not turn. There is no thread jam in the bobbin area. How about the belt? you have to take off the outer case, usually a few screws ...

...handwheel stuck. Just hums First, remove the bobbon, hook and anything in the lower part of the machine. try to turn the handwheel. Do not force it. If this does not free it up, take it to a ...

...stuck in the feeder, but was very easy to remove). I couldn't see any obvious tangles, but the handwheel wouldn't turn, and when I pressed on the foot-peddle, there was noise from the motor but no ...