...sprayer or arm located under the top rack. If the recirculating pump is plugged even a little there won't be enough volume or pressure to get the water up there. Test this by putting a dry muffin pan ...
...sprayer arms. Remove the upper arm by unscrewing the center bolt. Clean both sides before replacing. Check the water pressure. The dishwasher requires inlet water pressure between 20 to 120 psi. If ...
...pressure inside the unit with not much water spraying up from the arms. The dishes don't get cleaned and the powder is not being removed from the holder although the flap does open. There is a ...
sprayer. Just secure it with a tie wrap or wire and the noise should be gone. Refer to the following link for my earlier response to a similar issue which fixed the problem. http://www.fixya.com
...pressure to the mid and upper sprayer. Even the lower sprayer will be weak due to the lack of back-pressure. I took apart the flapper assembly and siliconed the bottom flapper shut, then carefully ...
181 questions posted
Usually answered in minutes!
236 Questions
209 Questions
138 Questions
116 Questions
106 Questions
