LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher "not spray" Questions

Spray arms not working Dishwasher goes through full cycle, but its clear the spray arms aren't moving/spraying water during the cycle. Water comes in and drains correctly. I took out all the screens &

...also causes same problem. Finally, check that the nozzles of spray arms are not clogged. So, could be: - motor circulation pump - circulation pump - filter - spray arms - electronic or power board ...

...the dishwasher for a minute or so and open the door to determine if the spray arm has moved. If not, there may be an issue with the water feeding to the spray arm (typically via the water pump,

not, remove plastic spray arm clip, flip it over, replace it, and try again. Make sure holes in the spray arm are clear of debris. Spray arm must be clean for it to spin. If spray arm does spin freely

...not rotate or spray any water. Whats the exact model? check whether the supply is passed over to the motor.... and also the motor Hello There is a fault in the device - motor, theres noting we can do ...

...spray arm may not wobble as much as the lower spray arm. On a final note, some dishwasher models have a water tube that meets up with the upper spray arm once the upper dishrack is pushed back. It is ...

...spray arms not spraying water Both upper spray arms are not spraying water... I have taken a air hose and sprayed them out...also the tube which supplies them water. They are clear. What now? It ...

...not Hello Alan - Will the spray arm rotate freely or is it damaged? If so, you might have to remove and replace the spray arm assemblies. The top spray arm typically starts to function when the unit ...

...not, then the spray arm(s) are probably clogged and restricting water flow (which makes them turn). Make certain that you are positioning the plates, glasses, etc. in the dishwasher so that they have ...

...spray arm was not rotating around. (I opened the door a few times when it was washing to find the spray arm in exactly the same position). I had a quick look at the spray arm holes but did not notice ...