Question about Konica Minolta bizhub Office Equipment & Supplies
how can i setup bizhub C 350 on XP How to setup a c350 to print lpr . Click start then printers and faxesclick add a printerclick nextmake sure local printer attached to this computer is checked and ...
Question about Konica Minolta bizhub Office Equipment & Supplies
..."SNMP" on the port settings. Disbale this setting in the print driver, also set print Queue to "LPR" and name the LPR queue as "printer". Make sure there are no jobs int he queue when you change ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...minolta bizhub 210 printer it is showing app error i think there is some problem in configuring lpr setting check the paper type in the driver, it might be setted to Letter and you are trying to ...
...LPR Printing, perform the following: For Windows 2000/XP/Server 2003: 1. For Windows 2000, click the [Start] button, point to Settings, and then click Printers. 2. For Windows XP/Server 2003, click ...
...stoped and re startes the printer spool. any other sugestions? Thanks, Stew Change your port to LPR and see if this works. Old Konica copier could not communicate with RAW
Question about Konica Minolta bizhub Office Equipment & Supplies
...and click on add port click on standard tcpip and then new port enter the tcpip address click on lpr and enable byte counting and the print queue name is print click ok and apply it should print ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...and click on add port click on standard tcpip and then new port enter the tcpip address click on lpr and enable byte counting and the print queue name is print click ok and apply it should print ...
...LPR printing will become the basis for all network printing while Novell print queues are phased out. Therefore, all Macintosh, Windows, and Unix computers will be configured to print through LPR. ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...printing through photoshop. Hi, Go in the printer section under Control panel. Right click Epson 10000 icon, than Properties. Go to Ports. Click the port it is using. Configure port. Protocol must be ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...the AutoCAD plots partial. What can we do to solve? Set to LPR or toe RAW printing? usually RAW works. if you the printer connected in any of the parallel port the LPR (DOS) line print shuld
1,100 questions posted
Usually answered in minutes!
1,023 Questions
417 Questions
261 Questions
256 Questions
111 Questions