Konica Minolta bizhub 350 All-In-One Laser Printer "lpr port" Questions

...port. Click next.then next againenter the printer ip address and click nextclick custom and then settings.click lpr enter the queue name: print and make sure to check mark the box that says lpr byte ...

...Port Wizard starts up, click the [Next] button. 7. In the Name of printer or IP address box, enter the IP address for this machine, and then click the [Next] button. 8. Select Custom, and then click ...

...port. Click next.then next again enter the printer ip address and click next click custom and then settings. click lpr enter the queue name: print and make sure to check mark the box that says lpr ...

driver and also i have stoped and re startes the printer spool. any other sugestions? Thanks, Stew Change your port to LPR and see if this works. Old Konica copier could not communicate with RAW ports

...click on add port click on standard tcpip and then new port enter the tcpip address click on lpr and enable byte counting and the print queue name is print click ok and apply it should print after ...

...port settings. Disbale this setting in the print driver, also set print Queue to "LPR" and name the LPR queue as "printer". Make sure there are no jobs int he queue when you change the port settings. ...

VPS drivers. It seemed to finished properly but what is wrong? hwo can u be sure that 'it finished properly' ? can you ping it ? azre u sure about your port addresse (it should be LPR port named PORT1

...click on add port click on standard tcpip and then new port enter the tcpip address click on lpr and enable byte counting and the print queue name is print click ok and apply it should print after ...

...LPR Then moves to DATA Wait LPR then goes back to Processing. Try this: Go to Ports in your driver properties Go to configure port Change your protocol from LPR to RAW and check if port is PORT ...

...LPR port. you may need to add other network and file services through add or remove windows components, in add remove programes before you get the option in ports within your driver for a direct LPR ...