Question about Konica Minolta bizhub Office Equipment & Supplies
...me....i have a konica 7040 copier which recently reads an error ( F-35-1 ). This code is for fuser heat failure. The fuser is the part that heats up and "fuses" the toner onto the paper and is ...
service error code what does a service error code c3451 indicate? C3451 Heat. Heater Trouble ? The Heating Roller Thermistor/1 (TH1) and the Heating Roller Thermistor/2 (TH3) fails to raise a given ...
...only. If the code comes back then the fusing unit the hot part is broke, it could be a thermistor, heat fuse, heat lamp or the board that controls it. Have a tech look at the fuser? Do not continue ...
Question about Konica Minolta bizhub Office Equipment & Supplies
malware functions eror cod c3451 C3451 is a Warm Up Failure. The fusing unit uses heat a pressure to "fix" the toner onto the paper. This code means that this unit is not heating up properly. You will
Question about Konica Minolta bizhub Office Equipment & Supplies
...and ask if there is a re-boot sequence to follow before you start delving into any controls C3451 Heat. heater trouble ? The heating roller thermistor/1 (TH1) fails to raise a given degree of ...
error c3921 konica minolta c451 error c3921 not known what to do C3921: Fusing sensor wire breaks detection (Center of the heating roller)... ? At the warm-up stage, the heating roller thermistor/3 ...
Question about Konica Minolta bizhub Office Equipment & Supplies
I want to make the machine cloning works Device does not function normally because of code on the screen, and this code is C3425 Memorandum do Fusing warm-up trouble • Detected temperature of the ...
Question about Konica Minolta bizhub Office Equipment & Supplies
a problem of Improper fuser temperature. 1. check supply voltage 2. Check thermistor located behind heat roller for toner accumulation
Question about Konica Minolta bizhub Office Equipment & Supplies
What are codes F-34 and F-35? These are heat sensor abnormality error codes in Konica Minolta 7222/7145/7135/7235/7228 models.You did not mention the model.
err c-3921 bizhurb c451 One of the sensors on the heat roller of the fuser unit is faulty...replace this sensor or the entire fuser unit and your problem will be solved
1,100 questions posted
Usually answered in minutes!
1,023 Questions
417 Questions
261 Questions
256 Questions
111 Questions