Konica Minolta bizhub 350 All-In-One Laser Printer "change copying black" Questions

...then some side black dots, please advice for remove black dots Check the heater unit (fusing unit). Change thermal roll in fusing unit. There may be problem of Drum, Check it and also clean

...to color copies. I would like to change the default to black and white. set printer to black and white, press utility, user settings, save and select current settings then press set, should ...

...change the settings. 1. Select black on the main copy screen. 2. Select the Utilities/counter button. 3. Select [DETAILS]. 4. Select [2. USER SETTING]. 5. Select [3 Initial settings]. 6. Select ...

...for adf if is new machine u have the setup **** for adf the setup **** (A4 page) with black border I usually go into service mode change the setting from table 2 to table 1 that solves the ...

...problem. Victor code no 2558 you not change the developwer or drum unit print the black page ,,,then you shown the paper jam paper out and then print as well as 20 copy and then out the 2558 code ...

konica bizhub 7272 imprint is too light copy machine was working fine untio we changed the toner. Now the imprint is barely visible. same problem with print and copy modes First I would try fresh ...

...copying proses the ac-dc sensor detects that the concentration is rong and it shows the C2557 error thats wen the error is shown by the copier . solving it is simple you can replace the dev. and run ...

...change the location or fileformat of the scanned files, do any of the following: In the Scan New Document dialog box, select the preset you want to use, such as Black and white. Click Preset options, ...

...black image unit 3. Change image unit 4. Change PWB-M 5. Change PWB-MFP you can try # 2 then run 20-30 sky shops (copies with lid up to make black copies) put a white piece of paper over lead edge ...