Konica Minolta bizhub 161f All-In-One Laser Printer "adf tray feeding" Questions

...ADF will not recognize paper in the feed tray. I have a Konica Minolta Bizhub Di1610, the upper Auto Document Feeder will not recognize when paper is set for copy or faxing. I have checked the paper ...

ADF tray contains fewer than 25 sheets of paper. 2. Make sure that the ADF tray contains no photo paper or carbon paper. 3. Make sure the paper in the ADF tray meets the following criteria: * No curls

...side up as they loop over the scanner and feed out with the text facing down. Check the ADF Tray as it will have a picture showing how the pages are meant to be placed to be fed through the

...Tray or Automatic Document Feeder (ADF). -Verify the Print Media Installed Is Compatible With the Printer -Clean the ADF Paper Feed Roller -Reseat the Dell Printer Power Adapter -Try a Different Type ...

...ADF exit interlock C1 Tray 1 jam C2 Tray 2 jam C3 Tray 3 jam C6-1, C6-2 Jams related to duplex C6-3 Registration sensor, re tray 1 C7-1, C7-2 HCF feed problems C7-3 Tray 1 feed problem C8 Paper stays ...

adf tray is not feeding papers The ADF feed rollers are soft rubber and the grip surfaces wear smooth after a while and need replacing. One idea is to use some isopropyl alcohol and a clean cloth to ...

...adf tray the paper start to feed but get stuck at the bottom Try this approach to fix the problem.1. Clear the paper jam.2. Update the firmware for your printer. The firmware update will help improve ...

...tray does not always feed during fax Hp help Automatic Document Feed (ADF) does not pick up paper. Follow each step, problem seems to be in pick assembly. Prcess took less than 5 minutes with a ...

...ADF door to clear a paper jam in the copy input tray and now the gears won't engage on the feed and the machine won't recognize that a sheet to copy has been loaded in the tray. untill and unless the ...

...tray is open, but I cannot see anything opened. HELP! This is used in my classroom and it is a life saver and it is pricey to replace. Thanks! Check that the hinges that are on the ADF (the bit that ...