Konica Minolta bizhub C250 All-In-One Laser Printer "dirty transfer belt" Questions

...the transfer belt with a soft cloth, if it is dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change PRCB. Hope fully not the last two

...dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change PRCB. run halftone prints from service mode to isolate which color is having an issue. ...

transfer belt if it is dirty with a soft cloth or change the transfer belt unit is damaged.Reinstall or reconnect IDC sensor shutter or connector for every color unit and clean the sensors when vacuum

...GUIDE ME "Dirty" could be one of 3 things... Transfer belt, Imaging unit and fuser unit. Make 5 copies in jam the machine by opening a cover. remove pages and see where the "dirt" originates

error code p21 p21 photo qulity poor P21 is a colour registration test pattern failure - check transfer belt for damage and or dirt, clean if dirty if damaged replace unit, or possible print head ...

its your drums. If it stays in one spot, its your transfer belt. Also you could check your drum units. If they have streaks going across the green drum, like its dirty, then its coming from the drums

...be dirty, the sensor could be dirty, the transfer belt could be damaged, and in some cases the transfer cleaning assy could be at fault. Probably will need a trained technican to fix this

...Dirty transfer belt contact sensor ? Defective transfer belt contact motor ? Disconnected connector of transfer belt contact sensor or motor ? Disconnected cable 1. Replace the transfer belt contact ...

transfer belt is dirty or dusty as well as transfer rollers. here is what I do first take the transfer belt unit out of the machine, take transfer belt out from the unit, clean inside of transfer belt

...Dirty transfer belt contact sensor Defective transfer belt contact motor Disconnected connector of transfer belt contact sensor or motor 1. Replace the transfer belt contact sensor 2. Replace the ...