...change the default tray for fax reports? To program a default paper tray to print fax reports, perform the following: 1. Select Utility/Counter. 2. Select User Setting. 3. Select System Setting 4. ...
...2. First remove the paper from behind the draws, that is probably what cause the problem. Then you need to get into service mode. Utility/counter, details, stop 00 stop 01, password 9272927292729272, ...
Question about Konica Minolta bizhub Office Equipment & Supplies
change the default on my HP P30005dn to Tray 2? I get notice that my printer has no paper - Manual tray is Tray 1, loaded tray is tray 2 Normal default on HP is tray 2, however if you do not have that
Question about Konica Minolta bizhub Office Equipment & Supplies
change default paper tray HP LaserJet 9050 Paper wants to pull from tray 1 not tray 2 - how do I change it so that it will pull from tray 2 When you click Print then right click on your HP ptinter - ...
...default tray. 2) Check the paper size settings in the paper tray. Pull tray 2 out and check the paper guides. Make sure the paper guide in the front and left of the paper tray are set for the correct ...
...Change the tray one behavior from the front panels paper handling menu. from there you can tell tray 1 to print first if paper is present or default to tray 2. factory settings are to print from tray ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...2 Type to "Heavy 111-130g" All paper handling settings as follows: Default Paper Size:Letter Default Paper Type:Plain Manual Feed:Off Duplex:Off Bind:Long Edge Tray 1 Size:Any size Tray 1 Type:Any ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...change the default tray to Tray 2 on a temporary basis until the engineers can come out and fix it. you can change the tray setting in user mode to tray 2 and same time do not fill the tray one. same ...
Question about Konica Minolta bizhub Office Equipment & Supplies
change the default tray on a HP 2430? We have a HP 2430 printer that we use to print document from MS Windows environment and from a linux application (BaaN IV). The tray 2, contains letterhead paper,
Question about Dell Office Equipment & Supplies
...change the "default source" to tray 2. Also, on each computer that you have the driver loaded on, you can right click on the printer icon, go to properties, and select your default printing
1,254 questions posted
Usually answered in minutes!
924 Questions
417 Questions
261 Questions
256 Questions
111 Questions