Konica Minolta bizhub C250 All-In-One Laser Printer "belt transfer unit" Questions

Ad

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

transfer belt , what should we do now ??? C13C8   A new installation is not detected when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed.When a new transfer belt unit is

Ad

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...the transfer belt unit contact and that of high voltage board for connection and clean or correct the contact. Change the image transfer belt unit. Clean the sensor windows on the transfer belt

Ad

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...Transfer Belt/Cleaning Unit.   SOLUTION: Perform an I/O check on M11 then verify that the motor and Transfer Belt/Cleaning Unit drive components are not bound up. Replace M11 (p/n 9314 1100 ...

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...transfer belt units.Remove the transfer unit and clean on vacuum cleaner the transfer belt cleaning blade.If you see the stripes on transfer belt after cleaning is work normally.If not observ stripes ...

...Transfer Belt, is there anyway to get back up running until new belt shows up Remove the transfer belt unit and change the chip fuse on transfer unit.The fuse is or a little green pieces or glass ...

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...transfer belt in the machine, on starting the machine it came up with a message 'serial number needs to be entered, contact service representative' after that screen the error screen came up 'an ...

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

transfer belt if it is dirty with a soft cloth or change the transfer belt unit is damaged.Reinstall or reconnect IDC sensor shutter or connector for every color unit and clean the sensors when vacuum

transfer belt? Konica Minolta c250 Open the front cover pull out the Cyan,Magenta,Yellow,Black image unit,clea used a vacum cleaner the copier inside.Open the right cover and remove 2 srews,remove the

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...the transfer belt with a soft cloth, if it is dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change PRCB. Hope fully not the last two

Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

...transfer belt with a soft cloth, if it is dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change PRCB. run halftone prints from service mode to ...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...