Question about Konica Minolta bizhub Office Equipment & Supplies
...error code for the image transfer belt pressure retraction failure to reset error code with the machine turned on open and close the front door if error comes back will have to replace either the ...
Question about Konica Minolta bizhub Office Equipment & Supplies
error code C-2451 I installed a new image transfer belt in the machine, on starting the machine it came up with a message 'serial number needs to be entered, contact service representative' after that
Question about Konica Minolta bizhub Office Equipment & Supplies
...Error Code appear and the machine is not working any more Code: C2152 Code C2152 Description Transfer belt pressure welding alienation • During a retraction operation of the transfer belt, the ...
...belt retraction failure. Its a common error that can be reset by opening and closing the front door with the machine on. Look in the trouble history and if has happened often, better order a new
Question about Konica Minolta bizhub Office Equipment & Supplies
...belt separation it seems that it the you transfer belt. to be sure, take the old one into the copier, swith off th copier, with 10 seconds or more, then swith on. the error code will disappear
Question about Konica Minolta bizhub Office Equipment & Supplies
...ERROR P5 IDC SENSOR.... HOW CAN SOLVE THIS PROBLEM..... P5 front IDC sensor failure.Wipe clean the surface of the transfer belt if it is dirty with a soft cloth or change the transfer belt unit is ...
...p21 Sir, You have a registration error , which will require removable of the transfer belt and cleaning of the sensors below the transfer belt, recommended a tech do it, unless you know what your ...
error code c2257 the transfer belt has a cleaning system as part of the belt there is a motor in the machine that when the belt is installed runs the cleaning system which is to remove the old toner ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...error code page.Press HELP,then press KEY OPERATOR MODE, scroll down to 21 EXECUTE ADJUST OPERATION, select COLOR REGIST AUTO ADJUSTMENT, then press OK, PREVIOUS SCREEN. After adjusting, it will back ...
...error 21 1 Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change ...
1,254 questions posted
Usually answered in minutes!
924 Questions
417 Questions
261 Questions
256 Questions
111 Questions
