...pressure when you fill outdoor unit on air condition It depends on the indoor and outdoor temperature and humidity. The low side pressure can be in the area of 135# to 145# with an indoor temperature ...
...unit. Hook up your gages and put a thermometer on liquid line (small line), start the AC. Measure the temperature of the liquid line and read the pressure on your gages. Theres a temperature scale on ...
...pressure gage increased 10 bar psi so what is that.????????? You are still low on freon. Charging AC by superheat and subcool First charging a unit by superheat, this is only for Acs with an orifice ...
...unit. Hook up your gages and put a thermometer on liquid line (small line), start the AC. Measure the temperature of the liquid line and read the pressure on your gages. Theres a temperature scale on ...
...pressure, looking for a differential of 15 to 20 dges. OR With a clean coil, running with about 225 psi on the red gage, you will want about 65 to 70 psi on the blue. These numbers are just for ...
...unit. Where can I get fittings to adapt to your machine? It may be a 410a unit. regular R22, R134 gauges will not work. You will need 410a gauges as it has much higher pressure in the
Question about Carrier Heating & Cooling
...pressure on line for type freon you're working with,i.e.,R-22. Temp. on low side gage should be what discharge air temp you are trying to obtain (50-55 degrees), and needle should indicate proper ...
...gage. low pressures in heat and cool on both high and low pressure gages are a sign of low charge. if low pressure and high pressure are close to the same on both gages then a good chance valve is ...
unit When you said low pressure side 40-60 pounds is that with the unit running or not running? Can you email [email protected] Unit must be running leave gages closed. The low side is the (suction) big
224 questions posted
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions
