Question about Frigidaire Washing Machines
...test 131763202 Frigidaire door lock switch on washer? Won't agitate or spin. how can I use jumpers to test 131763202 Frigidaire door lock switch on washer? Won't agitate or spin. Hi ...
Washer won't start and DR displays means door is open. If door is infact closed, i would say you have a faulty door switch. Replace and test, part number is 131763202
Door-Switch-Assembly/131763202/1531974 Let me know if you need further assistance going forward or if anything is not clear. Thank's again for visiting FixYa today. Good luck. Regards, Macmarkus :
Question about GE Washing Machines
...131763202. There are 2 additional prongs in a bank of 4, and the old part only had 2 wires. Which 2 are to be left open when installing the new part It is a circuit so test the connections on the ...
...test it it shows e41 door lock Hello, welcome to FixYa Based on the info you provided, specifically the E41 error, It sounds like the unit is detecting an unlocked door, loose wire, or the control ...
Question about Kenmore Washing Machines
...Test 8 = Remove power from the washer. Wait one minute. Can you open the door? Yes = Replace the control board (part number 137005010). No = Replace the door switch assembly (part number 131763202). ...
power and run a test cycle. Replace the door lock and switch assembly (part #131763202) to address the problem if the washer works fine with the door switch bypassed. If not, replace the control board
...131763202) if the wax motor reads shorted or open to address the issue. But if the wax motor resistance is normal, check the continuity of the door lock and switch assembly wire harness, particularly ...
...test procedure of the switch.**The door latch is likely the single most common fault (which prevent's any spin, and consequentlydrenching wet clothing at the end of the cycle) with the ...
321 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions