Frigidaire Affinity ATF7000ES Front Load Washer "run diagnostic test dryer" Questions

...run the diagnostics. The diagnostics code could tell you what is failing. There are component testing procedures listed to go through if the diagnostic code is not helpful. ...

...run, removed pump cleaned, and spun by hand, reassembled and operated correctly https://www.searspartsdirect.com/diy/error-codes/dryer-repair/1234594/bosch-dryer/1794 ...

diagnostic and got code F4E4. Tested power outlet and power at back of machine. All good. Was concerned it might be a faulty breaker, so I replaced it. Found service manual and performed CCU VAC test,

Test/ Function wrinkle release Diagnostic Codes dryer temp(^ ) Sequences up the help/diagnostic code list dryer temp(v) Sequences down the help/diagnostic code list time (-) Displays Software Revision

...test my whirlpool duet? There are certain buttons you push and I lost the instructions can anyone help are you trying to run diagnostics?With the machine off, hit any button (other than pause/cancel) ...

...is not running either. When I ran the diagnostic test I get error code E5B. Any suggestions on how to repair this problem? u can go to this web site for sevice manual ...

you try and run a diagnostic test cycle. If the test fails then an error code should be displayed. Here is a link to the complete service manual. Go to 6-1 for the diagnostic test. Keep me posted

...DIAGNOSTIC TEST C:00 I have been getting the same F35/Suds error as previous posters. When I enter the diagnostic test only, I can successfully get through all diagnostics. The first time. ...

...dryer would not clear door lock, held cycle signal and all is good, Love you guys! We have the same issue as described above by William. Controls appear normal, but when "Start" burton is held like ...

...Diagnostic test or any cycle. 6. Check the MCU by looking for operations of the drive motor. 7. Check the drive motor for powered rotations8. Check that the serial harness at the MCU is not mounted ...