Frigidaire ATF6000ES Front Load Washer "12 affinity" Questions

affinity error code 12 The washer runs for only 3 minutes and then sticks there, unable to continue. Happens with any cycle choice a 19 min rinse & spin will go to 16 min and freeze there. Got the

ERR 12 . Will not spin and drain replace the door lock switch

What is Err 12 on Frigidaire Affinity 8000 front load washer that won't spin or drain you need to replace the door lock assy

...Sits full of water till resumed. Pauses at same time consistently. Approximately 26 mins. and 12 mins. on heavy cycle of 59 min. length. the timer is busted getting stuck at same point their ...

Affinity washer front loader glacier blue I purchased the frig washer/dryer in blue - delivered it sat 4/12/08 - washer would only work on hot and then i had to use the extended spin (they came hooked

Cycle stops at 12 minutes remaining in all cycles. Sounds like a grinding noise in unit. Then machine stops with Water remaining in drum. No blocks in pump. I run spin only to empty water. E11 code ...

...Affinity Washer not emptying completely. Recently our washer has decided not to completely get our clothes "dry" at the end of the cycles and the clothes come out "sopping" wet. ...

...AFFINITY TECH REPAIR SERV MANUAL 1. take the two screws out of the top back side and remove the top panel. 2. Take the soap drawer out. 3. Take the two screws out of the top corners so that you can ...

...12). By then it's probably time to by a new machine anyways. We bought a new machine because it would cost over $500 CND to get the old one fixed. We ended up with a Frigidaire Affinity

...Affinity doesn't have that front lower panel. So it was take off the top panel, take out the soap tray, take off the control panel (4 screws, 3 by the soap tray, one you'll see when you take the top ...