Whirlpool MH3184XP Microwave Oven "keeps beeping 1" Questions

...keeps beeping When I plug the microwave in and set the clock and then heat something up, it keeps beeping even after I take out the item and everything is done. Sometimes it will beep every 1/2 hour ...

keeps beeping on GE spacesaver JVM1640WB can't get the beeper to stop beeping. It beeps apox, every 1 min. Does the display say anything? If it says "F3" then you have a shorted keypad. Please

keeps beeping and running the power setting down from 10 to 1, and just keeps doing it in rapid sequence. Nothing else on the keypad works. Pressing the Cancel button has no effect. Have unplugged it,

...keeps beeping nonstop. Hi. To mute your microwave, start by checking the control panel. Look closely. The mute function may be labeled as a secondary function of one of the standard buttons. Check ...

...rca microwave keeps beeping now and then and display 2:30 and 1:40 in the displaying screen This indicates the keypad control board is failing, or the actual keypad membrane has a intermittent

...keeps beeping loudly and giving me a sensor error! I can stop it, but it starts again shortly after! 1.tighten nut at sensor socket 2.check connections to socket 3.does error go away when sensor is ...

...beeping every minute or so until I open the door Disconnect the beeper speaker or muffle the speaker sound with something like tape across it. 1. Remove the outer panel to expose the internal ...

...beeping from 1 to 10 for several times. Then it stopped and "F2" showed on the panel. I couldn't press any numbers and it doesn't work. I unplugged it for a while. When I plugged it back it it let me ...

...1:00 but keep time of cooking anyway. after it returns to beeping all the time, sometime you have to leave it unplugged for a couple of hours. danby dmw11536 Quite often this is due to a bad door ...

...1 and beeps I put sound off so it won't keep beeping Unless there is grease, moisture, or some other foreign material deposits on your control circuit board, "SE" means you have a shorted membrane ...