...washer. If the temperature rise is less than the criteria, then the unit will drain and blink the clean light 7 times. The Proper incoming water temperature should be between 120°- 140° F. Possible ...
Question about Hotpoint Dishwashers
...temperature. Any detergent needs to have HOT water--at least 120 degrees or above to activate and clean properly! I also recommend ALWAYS using the high temp wash, boost, or whatever it's called to ...
washer empty with a completely full detergent cup on the highest temperature setting, extra rinse. Before you start it add to the detergent cup 1 teaspoon of TSP(tri-sodium phosphate), a very powerful
...washer keep repeating wash cycle doesn't go past this just keeps washing Hi Thanks for using FixYa. If the cycle doesn't complete, check these: Water-heating cycle Many dishwashers heat the wash ...
...washer. Sinder...this sounds more like a water temperature issue than anything else. First, turn on your hot tap. If you can't hold your hand under it after it fully heats (over 125)...you should be ...
washer assures that incoming water is the correct temperature to optimize cleaning performance. Most laundry detergents must be activated at certain temperatures to work correctly. We use thermisters
...washer to restart. If the clean light flashes 7 times, pauses, then repeats... When the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light ...
...washer detected greater than 100 deg F temperature Interval 7 -- Soaking/sensing LED should NOT come on (unless food soil is present). Interval 4 -- Soaking/sensing LED should come on Let the cycle ...
...washer gets water but does not clean the dish If there is not enough water, the dishes would not get cleaned. This could be caused by a partially closed water shut-off valve (located under the sink), ...
Question about Whirlpool Dishwashers
washer during the soaking cycle. But after that it gets stuck. Any pointers will help. The flashing light indicates there is a heater issue caused by a failure of one or more of the following: (1) The
153 questions posted
Usually answered in minutes!
915 Questions
493 Questions
219 Questions
129 Questions
99 Questions