Whirlpool GHW9400 Duet Washer "replace water valve" Questions

water and get shut-off valves installed.) Replace the intake valve. See http://www.appliancepartspros.com/whirlpool-inlet-valve-8181694-ap3128776.html for one vendor. To replace the valve, you'll need

...water. Valve letting water seep by? Your water inlet valve needs to be replaced. It's a leaky valve. The internal valve is controlled by a solenoid and sometimes a small piece of grit from the city ...

water when off The inlet valve is faulty and you have to replace it. It is located on the right side of the machine viewed from the rear where the fill hoses are attached to.Turn-off the water supply,

...water automatic fill valve is leaking. Replace the leaking valve in your washer. You can order the new valve online using washer brand and model number on a appliance parts web store, or maybe even ...

...replace if necessary. The water inlet valve can be identified by the water hoses connected to it at the back of the washer. Start by turning off the water supply at the valves on the wall. Disconnect ...

replace the water inlet valve, replacements can be ordered on line at searspartsdirect.com. Just type in your model number and look under the "Dispenser Parts" heading for item number 1 (part #8181694

...replace. Good luck!! Mike I'm pretty sure your water valve needs to be replaced. Changing a water valve is one of the easiest jobs in a washing machine. Just follow your water hoses Disconnect them ...

replace the water valve, remove the top of the washing machine. Three screws hold the top down. The screws that hold the top down are on the back of the top panel. Once removed the top will slide back

...water valve is bad..Replace.Sometimes the vales can stick open a little it is caused by buildup inside valves from minerals and other items in water....Note make sure if you replace valve that you ...