Whirlpool Duet GHW9150P Front Load Washer "weight" Questions

Whirlpool Duet GHW9400PWO: Replacement of the rear counter weight Hello, How difficult is it to replace a broken rear counter weight with a new one. I am no expert but I am technically inclined. Does ...

...for loose or dropped parts f duet front loader is wildly spinning and you have a load of similarly weight items. IE: Just towels, just shirts, just jeans. Listen to when the machine is just running. ...

...took the top panel off. Three screws and extremely easy. I found that a quarter of the rear counter weight is missing. It is not on the floor and since I can?t find it anywhere I assume that the unit ...

...people say, "they all do that". This thing is going to cause problems with my new floor and at the weight vibrating around it could also cause structural problems. I'm getting tired of wrestling it ...

...thing just happened to mine! I've had the same problem. I've read that it could be an overload in weight or even a weight sensor within the top of the unit. Another problem is it could be the drain ...

I had a clog in the pump filter, pump assembly fine cleared it all, now the drum is knocking in the spin mode and there is water leaking, not from pump. I read about the counter weights, the shocks ...

...THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING, the balance or counter weights. THE DRIVE PULLEY- If the washer is making a loud noise the drive pulley might be worn out, ...

...use a razor blade be very careful though only use that as a last resort. I sometimes use light weight sand

...and a large 100 + pound piece of concrete which gives the otherwise flimsy machine its hefty weight and supports it's wobbly wash tub). I was also informed by the service tech that the unit

...THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING, the balance or counter weights. THE DRIVE PULLEY- If the washer is making a loud noise the drive pulley might be worn out, ...