Whirlpool Duet GHW9150P Front Load Washer "dial cycle" Questions

...sud will lock and not move Have to unplug machine, change dial to drain and spin then sometimes will finish cycle. you nead to clean the unit.run a clean cycle two or three times with out

...dial to "rinse", the machine starts up right there and finishes the cycle. If I unplug the machine for about 10 min., it seems to "reset" itself and work fine. Your Circuit Control Board is starting ...

...cycle dial as some of the settings have rubbed off? I am not sure about the awm 293-600 number, but under the ghw 9150p (under your picture) I found one here.. ...

...cycle- door is looked, nothing happening f22 is a door lock error try this hit cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what ...

...cycle dial to all positions and punching end of cycle button. So far no luck. look for a button with lock symbol beside it press and hold button 3-5 secs lock light should go out and control resume ...

...dial with cycles that you can't control and it doesn't move as it goes through the cycle. I have been washing clothes for 45 years and this washer is the most wasteful on water and longest on time it ...

...cycle dial stuck blinking I have a Whirlpool front load washer model # GHW9460PLO. The red indicator light on the control panel where you select the different type wash cycle ( e.g. whitest whites, ...

...has been fine. yesterday after completing a cycle, it would not start to begin another one. I dialed the cycle I needed, closed the door which clicked shut, add detergent & bleach, pressed the ...

Mid cycle won't restart My grandson opened the washer before it drained and now it won't come back on. check safety switch under lid or dial is bad

...cycle, 103 minutes are flashing on the screen. You can move the dial and other functions will light up but nothing happens when you push any of the other buttons. I've tried the drain cycle and ...