Question about Whirlpool duet Washing Machines
cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what i did anyway. I took the motherboard out and searched around for the crack with
...cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what i did anyway. If you're getting an F22 error, you will want to check anything ...
Question about Whirlpool duet Washing Machines
...cancel once and put the dial on 'drain and spin' to complete the cycle. I think the problem is probably the computer control module, but I am hesitant to spend the money on the part ...
...dial the red light keeps flashing. When i push the green start button and hold it the washer does not start. It continues to flash. I unplugged the machine and left it alone for a while. Tried it ...
cancel twice if that doesnt work turn the dial around all the way to off try to unplug the washer if all that fails the remove the three torx screws remove the lower panel and reach up where the latch
...dial to what cycle you want, but when you push the start button it doesn't work. The reason I think the pause button is stuck is because the control panel is flashing and when you push the pause ...
Question about Whirlpool duet Washing Machines
cancel on it and mess around with the dial for me to even unlock the door, which can take some doing. Any suggestions? "F11" is a Serial Communications error between the Central Control Unit (CCU) and
Question about Kenmore Washing Machines
...cancel. Left it unplugged for 2 days plugged it in today 21-dec-16, still nothing. tried to get it into diagnostic mode and again nothing. tried diagnostic mode two times. no lights no anything. Well ...
lock light starts flashing to say it's finished. 4. Turn the dial back round to position 0 and all LEDs should go out. That's it - The control board is reset and all should be well In order to prevent
dial to drain spin, press cancel to turn off the led's. Within 5 seconds press and hold the options and pause/cancel together for 5 seconds. All the led's should light. Now by turning the dial 1 click
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
