Whirlpool LER7646E will not stay running When i hold down the start switch it runs fine. When i release the start button the dryer stops. replace the switch...onthejob
Whirlpool LER7646E dryer is not heating the dryer spins and blower works but no heat checked no power going to element Mounted on the element is 2 limits. If either is open their will be no heat. NOTE
Whirlpool LER7646E will not stay running I can hold down the start button and it will run. When i release the start button it stops running. I was told to replace the HEAT RELAY (3405281)or the Module
dryer wont run my dryer only runs on the cool down cycle it wont start up on any other cycle Dryer only starts on cool down setting defectvie timer,,,onthejob
Dryer smells burnt, thought we saw light smoke. Don't have owner's manual. something is on the element. possible fire hazzard, but usually burns a hole in element, rendering it useless.
My dryer will not turn on CHECK OUTLET THERE SHOULD BE GFCI AND THE HAVE A RESET BUTTON, MAKE SURE IT HAS POWER. IF IT HAS POWER CHECK THE SWITCH'S DOOR IS WORKING!!! THIS IS ONE OF THE MOST COMMUN ...
...a single cycle of drying. I have to do them twice. Is this a bad heating element? Whirlpool Model #LER7646 It could be or the moister sensor is bad. Do this first for most people never think of
What year is my Whirlpool Dryer, Model #LER7646E The date of manufacture is determined by the SERIAL NUMBER. The following link explains: ...
Whirlpool Dryer (LER7646E) not working Our Whirlpool dryer (LER7646E), when pushing the start button, will make a buzzing sound and then nothing. Sounds like the timer is running, but that's the only ...
Whirlpool LER646EQ0 Heating element will not stop heating when door is opened. Operating thermostat has failed 'ON' Needs to be replaced. Look at photo:
871 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
215 Questions
219 Questions
