Avanti W851 Top Load Washer "washing machine intake hoses leaking" Questions

Ad

Question about Hoover Washing Machines

4 Answers

...washing machine top load, model 550m.5.5kg doesnt stop filling with water.doesnt change cycle or spin.water leaks from cold water hose. water leak from cold hose nothing to do with other problem. ...

Ad

Question about Zanussi Washing Machines

3 Answers

...your soap dispenser also remove and clean the inside of it ie top and bottom of the in side area check the intake valve on left hand at backside machine or check the hose connection with intake ...

Ad

Question about Washing Machines

1 Answer

...Washing Machine leak Leak at top side edge near where hoses connect in back. Suspect intake valve or the connections inside from valve to point where the water goes into the drum. How do I get access ...

Question about Whirlpool Washing Machines

1 Answer

machine replaced hose still leaking hi bigger turn off the valves disconnect the hose check the threads on the water intake valve(bit the hose screws onto) are not damaged by cross threading. then try

Question about Maytag Washing Machines

1 Answer

...fill the machine are leaking but rather from internally and getting the floor very wet. The hoses are locted in the back do not open the top you may need to just replace the hoses,check intake ...

Question about Washing Machines

1 Answer

...washing macine, to see if its leaking or split. If they are leaking, unscrew the hose and check or replace the rubber washer, thats in the brass screw-in part. Next, unplug the washer power cord, ...

Washer leaks water where the hot an cold intake hoses are attached . Just Inside the metal back. Got any ideas. Water valve is most likely leaking assuming hoses aren’t the problem

Question about Avanti Washing Machines

1 Answer

coming from the intake or drain hoses. Where are the different places it could be leaking from? There is a pump underneath the machine. The pump might be bad. Pretty easy fix. It was a top load washer

Question about Washing Machines

1 Answer

...leaking where the hose is joined to the hose connecter, not where it connects to the washer. The hot water connection works fine until I move it to the cold water valve and then it also leaks; same ...

Question about Washing Machines

1 Answer

...machine is leaking Are you talking about the intake hose or the Y connection? if it is the Y with the clamp rings then you have to just go to an outlet or repair center and ask for the ...

Not finding what you are looking for?
Avanti W851 Top Load Washer Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Avanti Washing Machines Experts

Kolbrun...

Level 3 Expert

1228 Answers

john h

Level 3 Expert

29494 Answers

Jorgie  the...
Jorgie the...

Level 3 Expert

5639 Answers

Are you an Avanti Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...