Maytag MAH6700AWW Neptune Front-Load Washer "door lock mah4000aww" Questions

...BUT WHEN IT COMES TIME TO SPIN CYCLE IT WON'T SPIN my washer doesn't have lock door light on at all and clothes come out soaking wet I have the same problem, being told it's a motor controler

...door lock indicator light "on") after cycle has completed. I have tried restarting the cycle and allowing it to complete as well as unplugging the machine. Maytag support told me to remove the ...

MAH4000AWW Does not agitate or spin. Sometimes motor will turn very slowly and makes noise. No smell. Door locks. Water fills/drains. Circuit board ok. Belt ok. this  sounds like  a  ...

...door lock light is on but you can still open the door the wax motor is not locking but still sending power to the board to turn the door light on which causes power to go to the board and short the ...

Maytag Neptune MAH4000AWW my neptune wont lock and it fills but wont wash or spin just rince is this my interlock on my door I SAY REPLACE TIMER (POWER CONTROL BOARD)

...MY WASHERS DOOR WONT LOCK BUT WILL START FILLING AND ROTATING BRIEFLY BUT NO WASH OR SPIN CYCLE BUT WILL RINCE IS IT THE DOOR INTERLOCK SYSTEM OR WHAT PLEASE HELP. Try some WD40 on the door

door lock light won't go on and the door can be opened through out the whole cycle. Maytag Neptune mah4000aww Dear friend, ngfam at you service! The Neptune was discontinued for 98 design defects!!!!!

door won't lock so it won't go into the spin cycle..repairman replaced the circuit board ( 320.00 ) it worked for 3 0r 4 loads then the same thing...he put another circuitboard in...(warranty) and the

...unit, after this test the door lock-switch assembly. If the door lock-switch is also fine then the control board should be replaced. Hope this helps...please post back for further assistance. ...